Spooky witches Cauldron
Spooky witches Cauldron
Published 2017-10-24T10:18:42+00:00
This object was made in Tinkercad. https://www.tinkercad.com/things/4tjSocuOm6c
This is a spooky halloween witches cauldron for the Halloween contest.
#TrickOrTreat3D @MyMiniFactory @tinkercad @bcn3dtech
I test printed the main cauldron out of ABS and used supports, you might be able to get away without. It was about 10 hrs at .3 layer for speed. I plan on acetone smoothing and painting it, but I wanted to get a picture or three up here first.
The broth is made from clear PETG, I needed to make the hole size larger to allow the fog to drift out. The model has updated hole sizes. You could print in glow in the dark green or neon colors, and they will act like a photon pump with the blue LED's or blacklights.
The cauldron is intended to have a small nebulizer/hypersonic mist atomizer inside for the fog.
There is a skull free version, as well as a simple candy dish /collector bucket with handle. You could just tie strings to the small side handles as well.
Happy Halloween!
Infil 20% min
Clear Petg or clear pla for broth.
Supports required for ABS.
Prints pretty well.
If you upscale it, makesure you upscalr all parts by same amount!
Date published | 24/10/2017 |
¿Cuándo tiempo lleva? | 16 - 30 minutos |
Tecnología | FDM |
Complejidad | Fácil |