Loading
Star Wars - Boba Fett The Bounty Hunter - 75 mm scale model
3D
Published 2017-11-25T16:13:02+00:00
Star Wars - Boba Fett The Bounty Hunter - 75 mm scale model
3D
Published 2017-11-25T16:13:02+00:00
all ready to go. For more of my latest works, find them here
https://www.patreon.com/printedobsession
"I see why they call you the best bounty hunter in the galaxy."
―Darth Vader
Boba Fett was a Mandalorian warrior and bounty hunter. He was the only unaltered clone of the famed Jango Fett, created in 32 BBY as unit A0050, one of the first of many Fett replicas designed to become part of the Grand Army of the Republic, and was raised as Jango's son. Jango taught Boba much, training him to become a skilled bounty hunter as was his father-figure before him. In 22 BBY, Jango was killed at the Battle of Geonosis, which opened the Clone Wars. Just a boy, Boba was forced to grow up and took to traveling the galaxy. Later, he became a bounty hunter and took assignments from beings such as Jabba the Hutt, and achieved notoriety despite his young age.
| Date published | 25/11/2017 |
| Tecnología | FDM |
| Complejidad | Medio |
resolución 0,1 mm tardó 17 hs
Printed on Kodama Trinus with eSun PLA, 205/60°C, 0.2mm layer, 0.4m nozzle, 50mm/sec. Awesome design!
Printed full model - heigth 24cm Black model after Filler-Primer
Printed at 400% size. Sanded with 160 grit sandpaper. Primed with grey poly tamiya primer. Wet sanded with 400 grit sandpaper. Reprimed. Painted with a mix of vallejo and cheap acrylics. Topped with a clear coat. This project was a huge undertaking for me. Printing took close to 60 hours, prep work took 6 and painting took 5 hours. Alot of thanks to printed obsession. What would I do without you?!
scaled up to 20 inches painted with Vallejo paints build video https://youtu.be/gq37d8SK2T8
Printed at 375% Scale at .2
Great print, made mine aprox 8" tall including the stand. Thanks
Printed .2mm Acyrlic and enamel paints And silver paint marker Brill model...Thank the maker
Still not complete yet but it is almost done. Here a sneak peak pic
For some reason my CR 10 and Cura print mirrored, which I always forget to change, but came out great ,ready for painting...
75mm Height Material "HBP HEMP PLA/CANAPA"
scaled to 280%
Thank you so much C4th for this model ! Here's mine. Scaled at 400%.
We printed this one on the library's PolyPrinter 229.
Here’s mine at 200% and .2mm layer took 8hrs but well worth it. Next one will be a little bigger but this size is cool at 6.5” tall, thanks!!
@ 0.1
He looks great in Pewter! Great design.
Great design, from left to right (all 0.1mm). 1st: 100% full figure, some issues with midriff probably due to slicer used. 2nd: printed in parts, lost hand during cleaning. 3rd 200%, lots of cleaning and only broke the gun and antenna. May test 0.05mm since gun was a bit stringy.
printed on ender 3. had a few layer shifts but covered them up for the most part.
Printed at 125% @ 0.15 layer heights
Thanks for sharing this model. I love it!! Printed with my CR-10S at 0,2 layer height. And then, days and days painting. Base printed with Fillamentum Rapunzel Silver and Red Pearl Ruby
Great model! I hit mine with primer and metallic gray spray paint
Printed it at 200%, Had a couple problems with supports messing up the details on the arms and rifles, but a quick reprint of those parts and I think it turned out well. Also printed out a frozen Solo to go with it. Great detailed print.
Scale 200% at .12 10% infill
Printed with Elegoo Mars, great design, thank you!
My first time trying weathering techniques. Love the model, thank you
Very great design. Here's one of my first attempt to paint it. I tryed an "snowy" Boba. Not very proud of this but... i love the model.
Printed out pretty good, little bit of cutting and sanding is required, great STL! :D Hope you like painted version, armor in style of new protagonist of TV series: Mandalorian
Printed at .02 resolution
Printed 300% with Copper PLA at 0.16mm
Upscaled to 300%
great =)
My first print and what a great model to start with. Thank you Printed Obsession! Printed at 200%. Great detail. Only advice for painters, don't paint where his shoes fit into the base, it's quite a tight fit and the thickness of the paint will make a difference.
not my proudest paint job but here we go ;)
Facile a imprimer vraiment super agrandi a 400%
cube under mini is 3x3x3cm for scale. printed at 0.05 layer height
12х6см, 0.1mm layer height
First printed figurine on my new Photone mono X. Scale 400%. Painted by airbrash and brushes. Tamiya, decola, vlejo. Base printed from PLA on Ender 3 Pro I used liquid mask for painting chips on armor and some video: https://youtu.be/AngSrPtiows
Love this model. So clean and great pose. Thanks
love it
This was fun! Boba Fett is the best character! Thank you for the model!
Awesome model. Scaled up 2x, turned out GREAT!!!
Printed in white silk polyester. Printed in 6 pieces with support structure. I had to ‘fix’ several of the files on makeprintable. The legs and arms had trouble spots with Sli3er. Laying the body and head on its back actually provided a really good result. Working on making a really big version now :)