Summary
Let me start by thanking the people who inspired me to develop this violin remix. I especially want to thank firecardenal, on Thingiverse, who provided my initial inspiration and who by his numerous designs, showed the variety that could be achieved. I also wish to thank Stepan83, Jaxelsson on Thingiverse, and bchan on Pinshape who contributed parts used in this remix.

I liked the clean styling of the “Easy printing Electric Violin” and the classic look of the “Mina Violin (Electric),” but I wanted to see if I could make an even more traditional look while keeping with the modern style of other 3D printed electric violins. Most of my changes are purely cosmetic but are meant to pay tribute to the original work of such masters as Stradivarius.

Rev 2 corrected error in Lower Neck and Upper Bout for correct attachment.

Added Violin Bridge (Electric), (https://www.thingiverse.com/thing:2576368) by EngAl as this bridge appears more properly fitted.

Correctiion: V3: removed "Straivariant Body waist with f holes because the cavity below the top layer around the f holes cannot be properly supported. Added body-waist-f-holes-through and eviolin-body-waist-with-f-holes-plus-base. to correct this issue. this provides two options for the f holes.

Print Settings
Infill:

20%

Notes:

All parts can be printed without supports, except for the chin-rest
Recommended printing parameters:
4 Shell thickness.
3 top down solid thickness.
20 % infill
0.20mm. layer heights.

Post-Printing
If you print on ABS filament, you can use acetone or PVC pipe glue to bind the parties. If you print on PLA, then use a epoxi glue.
If you do not want to paint the PLA, be very careful not to sand or file any of the exposed areas, instead use a small Exacto knife to clean up edges.
If you choose to paint you can use a sanding paper and patching paste for automotive jobs to leave a smooth surface to paint on color of your choice. Don't forget to use a primer paint.

Materials List:
Printed parts – 10 pcs
Body Waist with F Holes 2 pcs
Chin Rest & Shoulder Supports 2 pcs
Neck Parts 3 pcs
Upper & Lower Bouts 2 pcs
Bridge 1 pc

Violin Pickup and Preamp - for under bridge (easy to find on eBay or Amazon)
Guitar Tuning Pegs - 4pcs (2 left/2 right)
violin strings – 4 pcs
Threaded Metal Rod M8 x 370mm – 1pcs
Screws:
m4x25 - 9pcs
m4x50 - 1pcs
m4x40 - 2pcs
m3x8 - 4pcs (for tuning pegs)
m2x10 - 4pcs (for electronic preamp)
Nuts:
M4 – 16 pcs
m3 long nut - 4pcs for hot installation in holes (for pegs screws) or you can use M3 Brass Wood Screw Inserts for the tuners - 4pcs (likely need to drill out a bit for a smooth fit, brass is soft and will break if it has much resistance in the plastic)

How I Designed This
I felt the scroll work at the top of the neck and the “F” holes in the body are part of that classical look but which were missing. I found the scroll “SLA Violin – Scroll” part of the “Violin” by bchan (https://pinshape.com/items/24608-3d-printed-violin). I tried various necks but found the best fit using “elviolin_v2_neck_p1_wout_support” and “elviolin_v2_handle” for the upper bout from the “Elviolin v2” by Stepan83 (https://www.thingiverse.com/thing:781491). Moving down the neck, I used “violin_neck_part2_better_pickup_wiring” for the lower fingerboard, “violin_neck_part3” for the tuning peg box, “body_lower_bout_basic2” fpr the lower bout and the “body_waist_block” from the “Mina Violin (Electric)” by Jaxelsson (https://www.thingiverse.com/thing:2122773) I then cut “F” holes into the body waist. Since I wanted to use the chin rest, “EZ2PRINT03” from the “Easy printing Electric Violin” by firecardenal (https://www.thingiverse.com/thing:767536) I cut the chin rest support pegs from the lower bout of “EZ2PRINT02” part of the “Easy printing Electric Violin” and added them to the lower bout from the Mina Violin. I wanted to accessorize as completely as possible so I included the “SHOULDER_SUPPORT” from “Captain Nemo Electric Violin” by firecardenal (https://www.thingiverse.com/thing:1642508) and the “BRIDGE” from “Rock Star Electric Violin V-3”, also by firecardenal (https://www.thingiverse.com/thing:982555).