Thread test
3,432
visitas
312
descargas
1 comentarios
Cargando comentarios... 
Thread test
3D
Published 2018-02-12T12:03:20+00:00
21
1
Add to Collection
Descripción
This nut and bolt combination is designed to be 3D-printed. That means the threads are sleightly modified. The thread of the bold has its outer diameter reduced by 0.2mm and the threads are 0.16 mm thinner. The theats of the nut are not changed.
Your 3D-printer should be able to print an almost perfect fitting bolt and nut, but if it doesn't fit that means your horizontal expansion is sleightly off.
All my future models will be designed with these thread tolerances.
Detalles de impresión
This model can be scaled up or down.
Use a detailed layer hight for the best result (0.15 - 0.05)
No supports, brims or rafts are needed
Información técnica
| Date published | 12/02/2018 |
| ¿Cuándo tiempo lleva? | - 20 minutos |
| Tecnología | FDM |
| Complejidad | Fácil |
| Sin apoyo | YES |
Más información
Archivos
