#TinkercadEaster Shooting Bunny
#TinkercadEaster Shooting Bunny
3D
Published 2018-04-12T15:13:18+00:00
This object was made for the Tinkercad Easter Design Challenge 2018.
In honor of Easter, I have designed an Easter bunny that can shoot small objects (i.e. airsoft pellets).
First, stick the bunny on its place on the spring. Then put the pellets (or any other small objects that fit) in the basket on the bunny's back. Afterwards, use your finger to push down the handle of the basket, while holding the spring down with another finger. All the pieces (spring, bunny, ammunition) can be stored inside of the egg.
Ammunition not included.
This object was made in Tinkercad. https://www.tinkercad.com/things/enxWB1ewuWx
#TinkercadEaster
Printing Tips:
I printed this object with the following settings:
layer height of 0.15mm
10% filling
support structures
The Bunny on the pictures was printed with a layer height of 0.2mm and the print duration was around 45 minutes
| Date published | 12/04/2018 |
| ¿Cuándo tiempo lleva? | 100 - 120 minutos |
| Tecnología | FDM |
| Complejidad | Fácil |