Tomb Raider - Excalibur Sword
Tomb Raider - Excalibur Sword
3D
Published 2016-10-03T15:02:29+00:00
***Keep an eye out for @JadeJoliex who will be weilding Excalibur as she celebrates 20 years of Tomb Raider***
This is the Excalibur sword from the Tomb Raider series, made to celebrate the 20th anniversay of Tomb Raider (Yes, 20!).
The model has been split into multiple parts and oriented on the bed to print easily without support.
It uses 36 dowels to help align and hold the parts together, these can either be printed or you can use some 8mm diameter metal rod which can be purchased from most DIY stores and then cut down into 40mm long dowels (For example - http://www.diy.com/search/results/?question=8mm+rod).
If you’re printing all of the dowels, I would advise using a high amount of Fill for extra strength (80%+), but for the best combination of strength and speed I would suggest using atleast one metal dowel at each of the lower joints (handle area), and then the rest 3D printed.
More information about the sword here – https://www.wikiraider.com/index.php/Excalibur
20th anniversary of Tomb Raider info here - https://store.na.square-enix.com/product/413434/rise-of-the-tomb-raider-20-year-celebration-ps4
Any questions just let me know, happy printing!
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
(This model was printed on a Robox)
| Date published | 03/10/2016 |
| Tecnología | FDM |
| Sin apoyo | YES |