Tram - Melbourne Tram
Destacado
7,422
visitas
431
descargas
1
colección
3 comentarios
Cargando comentarios...
Tram - Melbourne Tram
3D
Published 2018-01-02T17:55:35+00:00
35
3
Add to Collection
Descripción
I wanted to use these motorised bogie from the Open-Railway project and make a Melbourne Tram.
Motorized bogie for OS-Railway - fully 3D-printable railway system
https://www.thingiverse.com/thing:2644082
Starting before the hot rod, I have learnt lots in doing the AEC double decker bus, this in essence is easier, alignment of sections is often the hardest part. The parts have all been split up to the different sections.
Edited:
• whole body of the tram
• new roof - number on correct side, added numbers
• trim for undertake tram - print two parts left and right
To do:
• transformer on the top of the tram
Detalles de impresión
Layer Thickness 200 microns. InFill 20%.
Información técnica
Date published | 02/01/2018 |
¿Cuándo tiempo lleva? | 680 - 740 minutos |
Cantidad de filamento | 128 grams |
Dimensiones | 240mm x 50mm x 55mm |
Tecnología | FDM |
Complejidad | Medio |
Más información
Archivos