UBO - the Unknown Bottle Opener
UBO - the Unknown Bottle Opener
3D
Published 2019-02-11T10:05:13+00:00
Looking for a bottle opener which is out of this world?
UBO - the Unknown Bottle Opener is the thing you need!
This alien is a very handy eye-catcher for your next party, BBQ or whenever you are in need to open a bottle.
I created it for Alien3D and his amazing UFO Mystery boxes. All samples in this box are 20m long and you can print UBO with one sample.
to make UBO you need:
- A 3D printer
- about 15-16m filament (less than 50g for PETG or PLA)
- one US penny or one 2ct coin (€) or any other coin or metal disk that is smaller than 19,6 mm in diameter and 2 mm height.
You have to insert the coin into the hole during the printing process.
For this you have to pause the print at 3.0 mm layer height (which is after layer 15, when you print with 0.2 mm layer height.
After putting the coin in place, resume the print and let it finish.
That's all ;-)
No raft/brim and no supports needed.
Enjoy!
| Date published | 11/02/2019 |
| Sin apoyo | YES |
