Whoop Mullet Camera Mount Vacuform BUCK
Whoop Mullet Camera Mount Vacuform BUCK
3D
Published 2017-12-05T17:10:23+00:00
To use this design you need a vacuform in addition to a 3D printer. They are super easy to make, watch this video to see how I made mine. https://youtu.be/DWWq2hH7imA
I designed a way to mount the FPV camera and VTX on a whoop that is crazy strong and as light as possible. This is the BUCK to vacuform plastic around so that you can make the thin plastic pieces that mount to the whoop. THE 3D PRINTED PIECES DO NOT GET MOUNTED TO THE WHOOP!
I also had a hard time pulling the plastic off the buck after I had vacuformed the plastic plate onto it. So I figured out that if I add a small hole and shoot air up into the buck it pops the plastic off without any hassle of prying. (See pictures)
This mount was designed to be used with my Whoop Tank Canopy you can find here:
https://www.myminifactory.com/object/51374
| Date published | 05/12/2017 |
