Yaripon unit - Patapon
5,763
visitas
231
descargas
1
colección
0 comentarios
Cargando comentarios...
Yaripon unit - Patapon
3D
Published 2016-04-19T17:13:55+00:00
9
0
Add to Collection
Descripción
Here is a Yaripon unit from the game Patapon on PSP
Detalles de impresión
Here are the print settings for this file: 2 Perimeters 0.1mm - 0.2mm layer height 10-20% fill 0.4mm nozzle The arms on this model are extremely thin and tend to break very easily. I would highly recommend to thicken them. Also, the hole in the hand is too tight for the spear and must be drilled out. The problem is that the arms are so thin that it is basically impossible to drill out without ripping off the hand or the arm. Plan to use super glue with this model.
Información técnica
Date published | 19/04/2016 |
¿Cuándo tiempo lleva? | 300 - 600 minutos |
Cantidad de filamento | 40 |
Dimensiones | 90mm x 90mm x 115mm |
Tecnología | FDM |
Más información
Archivos