Barista Coffee Machine Knock Box For Coffee Grounds
Barista Coffee Machine Knock Box For Coffee Grounds
3D
Published 2017-03-20T19:17:25+00:00
If you own a Barista style Coffee Machine you will appreciate this design. It's made to work with common 54mm coffee grounds holders. The design has a thick upper section to make it withstand solid hits to clear the coffee grounds.
The Knock Box is deep enough to catch a generous double shot and has a diameter allowance to ensure you don't easily miss catching all the waste coffee.
There is also a handle to hold when 'knocking' and clearing the coffee grounds. This is also convenient when emptying the Knock Box.
Please read the print settings for recommendations to make this a strong print that will withstand lots of firm knocks...
Note: If you like this check out the rest of my practical and fun designs... and share images of your prints!
Use at least 3 shells and 35% infill to make it a strong print that will last a lot of 'knocks'... so a long time.
PLA is tough however. if you can adjust your roof height in your slicing application, change it to 3mm to make the upper edge solid... again this is to make it stronger so it will last longer.
Remove raft and make a great cup of coffee then clear the grounds into your new Knock Box!
Tell us more...
| Date de publication | 20/03/2017 |
| Technologie | FDM |
