Christmas Tree - Your own personal mini 3D printed Christmas tree with coloured decorations!
Christmas Tree - Your own personal mini 3D printed Christmas tree with coloured decorations!
3D
Published 2017-03-20T12:29:00+00:00
4 part slot together Christmas tree plus a star for the top which prints separately so you can use a different colour... natural PLA looks great for a star.
Pause the print at 3mm (approx. 97% with no raft) to change colour which adds the decorations.
The star is designed with a small amount of support that needs to be removed. This lets the stem protrude into the top of the tree to lightly secure it so it will stay in place.
Note: This tree has 8 sides in total so is more complex than other trees using a similar slot together method.
On a Replicator 2 print without Raft and no Support either. The tree prints well with 3 shells / 20% fill and 0.20mm resolution. The star is best printed "with" Raft and prints well with 3 shells and 50% fill to make it almost solid.
Z-Pause build at 3mm (approx. 97% without Raft) and change the colour to add coloured decorations.
Print the star separately. Natural PLA looks great due to its shiny translucent appearance. There is a small amount of designed in support on the base of the star that should be easy to remove. This exposes a longer centre stem that protrudes beyond the lower points of the star. This tem will help slot it securely into the top of the tree (assuming printer is printing accurately)
Notes:
(1) Recommend levelling build plate before starting this print due to some details on the underside that can come away during the first layer if not well levelled.
If you choose to use Raft the filament change point will need to be adjusted to compensate for the Raft thickness (usually about 1.25mm but varies by machine)
| Date de publication | 20/03/2017 |
| Technologie | FDM |