Compliant Cube Clips
Compliant Cube Clips
3D
Published 2019-07-11T08:47:39+00:00
These little 30mm cube clips are a fun functional example of compliant mechanisms.
The single part flexes to act as a reverse action gripper. Use this to clip papers, bags, hold up photos, or any way you can imagine.
I printed mine with PLA at 100% infill. PLA will lose clamping strength if left in the open position for a long period of time, especially at higher temperatures. ABS, PETG or ASA may be suitable options. Leave a comment if you have success with another filament!
I printed mine with PLA at 100% infill. PLA will lose clamping strength if left in the open position for a long period of time, especially at higher temperatures. ABS, PETG or ASA may be suitable options. Leave a comment if you have success with another filament!
| Date de publication | 11/07/2019 |
| Sans support | YES |
Made this with PolyTerra atb110% with 75% infill. For the kids habds, as this is for my sons birthday party. I also, replaced the grip texture with the new Spider-Man logo.