Cylinder Puzzle
Cylinder Puzzle
3D
Published 2018-06-18T10:12:33+00:00
This is a locking cylinder puzzle, based on orignal design by Wil Strijbos (https://www.mrpuzzle.com.au/first-cylinder-take-apart-progressive-move-puzzle.html). It requires 4 or 5 3/8" ball bearings, and 1 (5/8" x 1-9/16") spring. The outside of the cylinder is marked with lines representing 5 increments each. The correct orientation to solve the puzzle is the Answer to the Ultimate Question of Life, the Universe, and Everything (#42).
Solution:
This object does not require supports. I do recommend using 4+ shells so it builds from the inside out and helps with the minor overhangs (Cura does this by default).
Layer height: .1-.2
Infill: 15-20%
Speed: Fairly slow for outer cylinder lines (~30ms)
| Date de publication | 18/06/2018 |
| Durée d’impression | 9 - minutes |
| Quantité de filament | 75 |
| Dimensions | 80mm x 45mm |
| Sans support | YES |