DOTA 2 iPhone 6 Case
DOTA 2 iPhone 6 Case
3D
Published 2015-01-26T16:40:42+00:00
I designed this case using Solidworks for iPhone 6 owners that are fans of DOTA 2!
This protective case fits easily, just clipping over the phone.
The edges are strong enough to protect you phone from dents when dropped and the back covering protects it from scratches.
The lip around the edge of the case is raised slightly over the front of the screen so it will also prevent scratches on the screen if laid down on its front.
I designed it to be a fast and easy print - placed flat down onto the print bed (so the file will print as it is - without the need for support material or any extra measures).
I printed this one using an Ultimaker 2 but it will work just as well using other printers.
I used white PLA - at a layer height of 0.2mm and print speed 50mm/s with good results, as it is a fast print you could reduce the layer height further or choose slower print settings to produce a case of even higher quality!
Import the file into your printer software with the back facing down onto the print bed.
Turn off support material and you're ready to print.
The finish on the back of the case will be shinier if it is printed onto a smooth surface such as glass, printing onto other materials such as masking tape will result in more of a matte finish.
| Date de publication | 26/01/2015 |
| Durée d’impression | 60 - 10 minutes |
| Quantité de filament | 24 grams |
| Dimensions | 160mm x 70mm x 9mm |
| Complexité | Very Easy |
| Sans support | YES |
