Flexi Raptor
Flexi Raptor
3D
Published 2018-05-09T12:09:39+00:00
A flexible velociraptor! How cool! This is a very flexible, print-in-place model I spent a long time designing. A lot of attention to detail in this model, and a few of the smaller tail links are weak due to their size so be careful! He can stand on his own or hang from something; he can even bite his own tail! One of the links just behind his hip will be a little stiff after the print and will just take a little careful working to get completely flexible, otherwise he should print and pop off the board in a completely flexible state. Have fun! Kudos to DrLex, Kirbs and airfish for developing the link mechanic used in this model
Not suitable for small children, the tail end pieces may be fragile and could break off and be swallowed.
Send me a message if you have an idea for my next model!
updates 5-10-18:
- improved feet to stand better
- improved tail positioning to print without binding
.2mm layer height
15% infill
Make sure to print this raptor on his right side as the tail has a taper and is designed to print that way
No rafts or supports needed
| Date de publication | 09/05/2018 |
| Technologie | FDM |
| Complexité | Very Easy |
Printed using Click & Print