Folio Vase
Folio Vase
3D
Published 2019-02-05T12:20:10+00:00
You might also like these free designs!
* Zephyr Vase: https://www.myminifactory.com/object/3d-print-81577
* Cog Bowl: https://www.myminifactory.com/object/3d-print-75430
* Groover Vase: https://www.myminifactory.com/object/3d-print-75113
* Classical Vase: https://www.myminifactory.com/object/3d-print-81753
* Lattice Bowl: https://www.myminifactory.com/object/3d-print-53755
* Blade Vase: https://www.myminifactory.com/object/3d-print-78571
* Gothic Goblet: https://www.myminifactory.com/object/3d-print-73249
* Fan Parabola Vase: https://www.myminifactory.com/object/3d-print-73432
* Clover Vase: https://www.myminifactory.com/object/3d-print-71567
* Chunky Ring Vase: https://www.myminifactory.com/object/3d-print-77170
* Tendril Vase: https://www.myminifactory.com/object/3d-print-51873
* Jigsaw Vase: https://www.myminifactory.com/object/3d-print-50426
* Lace-up Tiled Vase: https://www.myminifactory.com/object/3d-print-45183
* Paintpot Planter: https://www.myminifactory.com/object/3d-print-40901
* Rustic Star Vase: https://www.myminifactory.com/object/3d-print-73918
* Quadratic Vase: https://www.myminifactory.com/object/3d-print-73047
* Pumpkin Jigsaw Vase: https://www.myminifactory.com/object/3d-print-72744
* Pinstriped Table Vase: https://www.myminifactory.com/object/3d-print-71432
And this premium design:
* Relic Vase: https://www.myminifactory.com/object/3d-print-79349
If you're wondering why I like vases so much, check out this video!
(don't forget to subscribe!)
* Vase Mode is Great!: https://youtu.be/tba6KHk4qRk
This particular vase has a pentagonal profile with a panelled outer, for extra specialness. The design is inset or outset, depending on your point of view, but all implemented such that no angle is steeper than 45 degrees, which is important in a vase mode print if we want things to retain some semblance of structural integrity!
Enjoy!
This is of course a vase mode print (that's Spiralize Outer Contour in Cura), so set your slicer accordingly! All the features are designed to print neatly in vase mode, with no angle greater than 45 degrees, so it should be nice and easy!
| Date de publication | 05/02/2019 |
| Sans support | YES |
Thanks for the pretty design Clockspring!