Loc Line Camera Mount
Loc Line Camera Mount
3D
Published 2019-01-14T10:30:19+00:00
Loc Line Camera Mount
I built a camera mount for my Logitech C270 camera that I use with Octoprint (OctoPi). I use this camera to keep an eye on my printer and to take timelapse video of my prints. The camera connects to the camera mount using an M3x25 screw and a nut. And the bracket connects to the 2020 extrusion using two M4x10 screws and some sliding T-Nuts. Links to all the hardware are below.
I found that when I printed the camera mount at regular size with ABS I couldn't connect it to the loc line. But by increasing the size to 105% in the slicer it worked perfectly. You may have to make adjustments when you print. Fortunately the part is small and prints quickly.
Hardware
- C270 Camera:
https://www.amazon.com/dp/B004FHO5Y6/ref=cm_sw_em_r_mt_dp_U_wrVlCbWNH12KG - Loc Line:
https://www.amazon.com/dp/B006R9O3HE/ref=cm_sw_em_r_mt_dp_U_RuVlCb1PSKWQW
Coupling Adapter to connect Loc Line to bracket: https://www.amazon.com/dp/B00CUCVOD8/ref=cm_sw_em_r_mt_dp_U_4wVlCb0R3FHNZ - Sliding T-Nuts: https://www.amazon.com/dp/B0765Q7VFL/ref=cm_sw_em_r_mt_dp_U_XvVlCbB9T4FDG
| Date de publication | 14/01/2019 |
| Sans support | YES |