Masterspool for refills
Masterspool for refills
Published 2018-04-16T11:48:05+00:00
Reduce waste and cut costs by printing your own, re-useable spool and buying refill filament.
The 2 pieces will print out without any problems and are designed to screw together. As colour is not normally an issue for this kind of item, why not use up all your odds and ends of filament?
The refills are held together with re-useable cable-ties. Simply line the slots with the ties and undo them. Note, the diameter of the hole is 52.5mm.
When you need to change the filament on the Masterspool, simply re-tie the cables, un-screw the halves and lift off the filament.
You can buy refills here -
https://3d-print-works.com/products/pla-1-75mm-elefilament-refills-3d-printer-filament
Masterspool designed by Richard at Reprap
You can find full instructions on our website about how easy it is to use Masterspool and how to change the the colour of the filament.
Well designed for 3D Printing, no support needed.
As colour is not normally important for this item, why not use up all your odds and ends of filament?
Can be printed with 0.6 nozzle and 0.3 layers to speed it up.
Date de publication | 16/04/2018 |
Durée d’impression | 480 - 1500 minutes |
Quantité de filament | 247g |
Dimensions | 198 x 198 |
Sans support | YES |