N95 Montana Mask
9,032
views
802
downloads
1
collection
15 comments
Loading comments...
N95 Montana Mask
3D
Published 2020-03-29T20:10:23+00:00
75
15
Add to Collection
Description
The montana mask was created by longliveyoursmile.com they released this file they are using to help with the n95 mask shortages. I have printed and tried it out. They fit quite well. You can use dish rags, tshirt material, paper towel or anything you can think of. You can use the n95 paper masks and cut them into about 6 pieces to get more uses out of one mask. I used 4 layers of blue automotive shop towels just to try it out.
I also scaled one 95% for my wife that fit her well, Included file.
I have also included a file to create 4 masks if your printer is large enough.
Printer is a Creality CR-10
1 mask takes appx 3hr 30min
Licence
Technical Information
Date de publication | 29/03/2020 |
Sans support | YES |
More Information
Object Parts
Printed without a hitch. No support material required. Was 6 hours 27 minutes for the mask, and 59 minutes for the filter frame. 20% infill at 0.2 mm. Mask fits snuggly. Going to do the finishing touches today! Excellent design! :-)