PS4 Raspberry Pi case
PS4 Raspberry Pi case
3D
Published 2018-01-15T13:35:41+00:00
View my portfolio and other items at carraway3d.com (pretty bare right now as its still under construction, but it's usable and I'll be adding new items regularly). You may also submit a quote if you would like something printed for you or designed for you through my site.
I went all out designing this PS4 inspired Raspberry Pi case. This case will allow you to store your SD cards or any small objects as well as having plenty of room for wiring on the inside.
I decided not to use any hardware and instead opted to design it for 6x3mm neodymium magnets. I went this route so the user of this case would have easy access to anything they store and to the Raspberry Pi itself.
I have not had a chance to print this yet so if you print it, please let me know how it works out and if I should make any changes.
Thank you!
Nothing particularly special. I put down a layer of PVC glue on the PEI sheet to make sure a print of this size didn't curl at all while cooling. The Raspberry Pi fits fairly well in the top part of the case. However, the small fitting around the audio jack cracked off while I was trying to get it aligned. In any case, the micro-usb power jack doesn't line up correctly when all of the other ports are in place.
| Date de publication | 15/01/2018 |
| Durée d’impression | 900 - 1000 minutes |
| Quantité de filament | 350 grams |
| Dimensions | 186 x 180 x 35mm |
| Technologie | FDM |
| Complexité | Easy |
| Sans support | YES |