Spacestation for Tabletop Games - Orbital Factory Station - Mod.1&2:

Scale: 1/3000th

Suitable for the following tabletop systems: Star Wars, Starmada, Starmada Brigade X, Spacefleet Gothic, Taskforce Zeta and others.

Stand: Yes (round hexagon base with stand)

Type: Spacestation (small)

STL files for one Spacestation modification one or two.

Modification one: You use only the stand and the parts for the upper ring. Modification two: Spacestation with two rings and the complete flying stand.

Print information:

dimensions: length: 86.5mm; width:79mm; height:26mm

Maybe you need supporters for the station rings. I am not sure :|!

!!!It is Version V0.1. Maybe you must drill holes or work with Green Stuff.!!!

All ident and all other objects used in model have a minimum heigth of 0.5mm.

!!!Maybe, you must scale up or down to the values!!!

Other information when I have printed it or someone else is so nice and send me his print data (infill, etc.).

Assembly instruction:

!!!It is Version V0.1. Maybe you have to drill holes or work with Green Stuff.!!!

You have to print following parts:

1x STL (one Spacestation Mod. 2 or Mod. 1). All Parts are in the STL.

What you need for Assembly:

- plastic glue

- a stand

- maybe drill and Green Stuff

Assembly:

For orientation: Use the second picture. It shows the assembly (from left to right).

1. Print the model.

2. Glue the parts together with the plastic adhesive.

2.1: Glue the round top on the staion rings

2.2: Turn around the two half of the station and glue the shown part together (station rings bottom part)

2.3: Put the stand together

2.4: Insert the stand into the station.

For modification one use only the upper ring of the station. The upper ring have only one cross braces (six of them)

For modification two glue the upper and bottom ring together before you insert the stand into the bottom part.

!!!Use the second picture. It shows the assembly (from left to right)!!!

3. If you need an other flying Stand look here.

4. Painting and tadaa. The model is finished. Have fun.

Other information:

Feel free to send me a personal message if you have any questions.

You noticed mistakes or you have improvements? Please send me a PM.

Please credit me when sharing this object (Maybe with my profil-link :) ). Thanks!

Model version: V0.1 (maybe you have to rework the 3D-Model or/and the printed model)

Printed by myself: No, (only assembled virtually)