syringe pump
syringe pump
Published 2015-04-24T10:39:02+00:00
This is a customizable fully parametric open source syringe pump. One file is shown here. For the design in OpenSCAD so you can customize the components for the complete pump, bill of materials, operation and assembly instructions go here.
The details of the syringe pump are in the academic article: Bas Wijnen, Emily J. Hunt, Gerald C. Anzalone, Joshua M. Pearce, Open-source Syringe Pump Library, PLoS ONE 9(9): e107216.
This is part of our ongoing effort to make inexpensive high-power Open Source Labs for all. FREE access to content from Open-Source Lab: How to Build Your Own Hardware and Reduce Research Costs
Print at 0.2 mm layer height, with 10% infill. This uses 8 g of filament and takes 1 hour and 41 minutes.
Date de publication | 24/04/2015 |
Durée d’impression | 101 - 111 minutes |
Quantité de filament | 8 g |
Dimensions | 62 mm x 58 mm x 10 mm |
Complexité | Very Easy |