TIE Fighter Interceptor Kit Card
TIE Fighter Interceptor Kit Card
3D
Published 2020-09-07T14:25:13+00:00
We love the Star Wars Kit Cards at our office. After designing the millennium falcon kit card, I thought I would try to design a tie interceptor to go with the others we've printed for the office.
This was made to fit when printed on my homemade hypercube300 printer which is not the highest precision printer in the world, so you may have to adjust the z-scale slightly up or down without changing the x & y scale to get the best fit for your printer.
There are two versions included. One with a ring for hanging, or using as an ornament, and one without a ring.
Printed card is 120mm X 120mm to fit on most printers.
Assembled Model is roughly 82mm X 63mm X 50mm.
Printer in Hatchbox Gray PLA at 30mm/s at 200C with 50C heated bed.
Example printed at 0.2mm layer heights, but smaller heights seem to make it fit together better.
| Date de publication | 07/09/2020 |
| Durée d’impression | 59 - minutes |
| Dimensions | 120mm X 120mm X 2.4mm |
| Sans support | YES |
Another cool model.