Tom Cat - - Onepiece
Tom Cat - - Onepiece
Published 2023-07-16T23:03:51+00:00
Tom Cat, a cartoon character from the "Tom and Jerry" series of short films created by Hanna and Barbera for MGM.
This is a onepiece version of Tom Cat based on my multi-part Tom Cat model that I've previously posted.
Since I do not have an SLA printer, I teamed up with maker Cults maker 93SOL (Adam) to do the printing and painting.
I converted my multi-part model to a onepiece model for SLA and FDM printing. Adam then proceeded as follows:
1 - Resized the model for his printer to 65% scale.
2 - Printed him hollow with 1.5mm thick walls and dug holes in the slicer in both feet and directly underneath him between his legs (see picture section). This let’s all the un-cured resin drain out of the model and helps reduce suction while printing.
3 - Used heavy supports.
4 - Adam suggested making the whiskers a bit thicker to make support removal easier. The model posted here has the thicker whiskers.
----------------------
Other notes regarding the supplied STL file:
For FDM and SLA printing, size the STL file as needed for your purpose and add Slicer supports.
Enjoy!
Date de publication | 16/07/2023 |
Steve's stuff is the Cat's Whiskers, I don't have the patience or skills for multi-part so I'm over the moon Steve has taken the time and effort to make one-piece versions of his stunning models. You are a true legend, Thank You