Twin Trio Candelabra
$3.99 Twin Trio Candelabra
3D
Published 2018-10-22T08:42:13+00:00
Hi, if you like this check out my other creations and support me here.
This series of T Light Candelabras has gotten bigger and more complex, this one is a slight reverse in that it is small and compact while still having enough tealights to give good room illumination, the tubes are 'twinned' this time.
The candle holes are now larger for ease of removal and the dimple keeps the flame away from the plastic. or you can use LED Tealights instead of burning ones for peace of mind - they will fit too (see pics).
Inspired by the tube worms that live around Hydrothermal vents at depths of around 2.5 km this series of Chandeliers uses T Lights to their best advantage by grouping them together increasing their light out-put.
They lend an elegant functionality to any dining table or home, while mimmicking the gentle sway of marine environs.
I used a raft for this print as it makes removal from the print plate just so much easier.
- Layer height 0.1mm
- Walls 0.8
- Infill 12%
- Print speed 60mm/s you can try 80mm/s
- Adhesion- Raft
- No support
| Date de publication | 22/10/2018 |
| Price | $3.99 |
| Durée d’impression | 1080 - minutes |
| Quantité de filament | 111grams |
| Dimensions | 141.8mm x 142.5mm x 138mm |
| Sans support | YES |
ABS Layer 0.25