Two Simple Vases
Two Simple Vases
Published 2017-09-18T11:21:57+00:00
Hi!
Sometimes buggy code may produce interesting things.
Playing with 'vases' in OpenSCAD something went wrong with code and i decided to share the results.
I specially like the black one, i think is perfect as a decoration piece or as a planter.
Print 'spiralized' or 'vase mode' depending your slicer settings.
Hope you enjoy it
Have fun!
Used 'Vertigo Grey' PLA filament from Fillamentum and 'Marble Like' PLA from SpannerHands
Models in pictures printed using the Anet E10 courtesy of Gearbest.
You can buy ANET E10 here (affiliate links):
EU PLUG | US PLUG | UK PLUG
Use 'Vase mode' or 'spiralized'.
I managed to print good vases using 0.15 or 0.20 mms layers, 110-120% extrusion/flow and decreasing speed a bit (i usually print at 60mm/s but in vases i print between 40-50 mm/s)
Date de publication | 18/09/2017 |
Technologie | FDM |
Complexité | Easy |
Sans support | YES |