Vesa Carry Handle
Vesa Carry Handle
Published 2017-10-03T11:40:17+00:00
This thing enables you to easily carry your monitor anywhere you want to without grabbing to the monitor's frame.
The "slotted" type model are primarily to be used with vesa.stl https://www.thingiverse.com/thing:1442005
Notes:
1. Use M4 x 10 screws to fasten it and slowly lift your monitor to see if the handle are able to lift your monitor without too much flex.
2. PLA should work as well as ABS cause PLA are much more rigid only drawbacks is that PLA would start to go soft at 50'c
3. Can refer to this video, printed in ABS https://youtu.be/vX01b4AZPCE
Scalable model printed with standard settings. Dimensions, time to print and material quantity refer to the object I made.
Date de publication | 03/10/2017 |
Durée d’impression | 45 - 60 minutes |
Quantité de filament | 6g each |
Dimensions | 70x65x6mm |
Technologie | FDM |
Complexité | Very Easy |
Sans support | YES |