Water Wheel
Water Wheel
Published 2017-06-19T18:38:12+00:00
- made for my son, who loves to play with any kind of water outside
- wheel is designed to spin around a stationary axle/rod. The flange parts need to rotate freely around the rod
- axle/rod can be held up by a bucket, or with some twigs as shown in the pictures, or just placed on some stones if you play with this on a little creek
- I glued some matching washers onto the axle to keep the water wheel fixed in axial direction
- the wheel is light, uses little material but is still stiff enough for play purposes
- main body consists of 2 parts
- I prepared some axle/rod flanges for 8;10;12 mm and 1/2"; 3/8" diameters
- parts need to be glued together
- outer diameter roughly 185 mm, so it should fit on most build plates easily
- have fun :D
- model units are [mm]
- 0.2 print resolution
- no raft/supports needed
- printed in DasFilament PETG transl. yellow
Date de publication | 19/06/2017 |
Technologie | FDM |
Complexité | Very Easy |
Sans support | YES |