Airsoft Submachine Gun
Airsoft Submachine Gun
3D
Published 2015-08-05T14:17:18+00:00
After designing my first 3D printable airsoft gun, a few people have been requesting a smaller one that they can print at home. So here it is!
All parts are small enough to fit comfortably in a 120x120x120mm print volume, there are fewer non-printed parts, and it has more features. The gun won't be as powerful as the previous design due to it's smaller size, but on 0.12g bb's it'll shoot 25-30m.
Instructions for assembly can be found here: http://www.instructables.com/id/Printable-Airsoft-Submachine-Gun/ Here is a list of the non-printable parts you'll need: ► 3 x M4x25mm* countersunk bolts ► 1 x M4x25mm buttonhead bolt ► 2 x M4 nut ► 1 x M4x38mm countersunk bolt ► 1 x rubber band between 50mm-100mm long (measured unstretched flat) ► 3 x 5-6mm OD* 20mm long pen springs (any pen spring will do) ► 1 x 5-6mm OD 60mm long pen spring ► 7 x 2mm OD 20mm (or longer) nails ► 1 x 2mm OD 60mm long flat head nail ► 2 x 1.5mm OD 20mm (or longer) nails ► 1 x Bike Pump* ► 1 x 190mm airsoft barrel & hop up bucking ► 1 x 1m of aluminium flat bar (12mm x 3mm cross section) ► 1 x 700g (or more) reel of ABS printer filament (black recommended) ► 1 x 100mm long bb pistol spring, or any spring of your choice (15mm OD) And here are the tools you need: ► 3D Printer with 120mm cubed volume ► Pliers/side cutters (for cutting nails) ► Support removal tools ► Sand paper ► Phillips head screwdriver *M4x25 means 4mm diameter (outside of thread) and 25mm long *OD stands for 'outer diameter' *http://www.ebay.com/itm/Portable-Hand-held-Mini-Bike-Bicycle-High-Pressure-Air-Pump-Tire-Inflator-Silver/361354425717?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D29980%26meid%3D6830a240a4de423a9a9a82da616a3809%26pid%3D100011%26rk%3D3%26rkt%3D10%26sd%3D111191753652
| Date published | 05/08/2015 |
| Quantità di filamento | - |
| Dimensioni | - |
| Tecnologia | FDM |
| Complessità | Difficult |