Anet A8 2 Piece Y Axis Belt Clamp
Anet A8 2 Piece Y Axis Belt Clamp
3D
Published 2017-05-16T11:29:39+00:00
This is a 2 Piece Y Axis belt holder for the Anet A8! if you have upgraded your belts to fiberglass please check out my other items i have one made specifically for the upgraded belt, although this design will work for both belt types.
If you have your H frame upsidown, which is oddly how they show you to assemble it in the instructional video, you will need to scale the spacer plate in the Z direction.
Also! If your Y axis belt isn't lining up straight it's probably because the front of your frame is not symmetrical, the idler mount should be closer to the left guide rail than the right! Also if you flip the front plate make sure you adjust your motor pulley back if you moved it.
Layer Thickness 150 microns. InFill 100%.
| Date published | 16/05/2017 |
| Tempo per farlo | 50 - 55 Minuti |
| Quantità di filamento | 7 grams |
| Dimensioni | 35mm x 22mm x 10mm |
| Tecnologia | FDM |
| Complessità | Easy |
| Supporto Gratuito | YES |