Assistant to Buckle Buttons and Zippers.
Assistant to Buckle Buttons and Zippers.
3D
Published 2016-09-08T17:03:05+00:00
These are small assistants to help those with limitations in their hands, to which are difficult to button his shirt, the sack or even close a zipper.
But all hands with debilitating conditions are not the same, For that I decided to make two models each with a different form of grab. Depending on the condition you have, it may choose the most convenient for use
The model consists of two parts, the long flexible part is to buckle buttons, and the hook the opposite side to this is to close zippers.
The piece should be printed with 100% filling.
I hope this design be helpful for those with limited use of their hands.
Quite easy printing, supports rafts are recommended because of the thin parts.
| Date published | 08/09/2016 |
| Tempo per farlo | 40 - 60 Minuti |
| Quantità di filamento | 3 grams for each one |
| Dimensioni | 92mm x 14mm x 36mm for model 1 // 78mm x 7mm x 99mm for model 2 |
| Tecnologia | FDM |