Business card and pen holder
3,055
views
75
downloads
1
collection
0 comments
Loading comments... 
Business card and pen holder
3D
Published 2017-03-03T11:44:38+00:00
13
0
Add to Collection
Description
I wanted to play around with making funcitonal objects using vase mode to help quick prints. I created this to fit normal 3.5in x 2in business cards and a pen or pencil under 15mm in diameter.
the warped look at the top was designed to keep the cards from falling out when stuffed in a desk.
Spiralize the outer contour, at 0.2mm print height. 150mm/s print speed. 75mm/s upper and lower portions. prints in about 30 minutes.
0.5mm line width using a .4mm diameter extruder.
(you can substitude higher material flow rate instead of the 0.5mm line width, but that would cause buldging in the base plate.)
Technical Information
| Date published | 03/03/2017 |
| Tempo per farlo | - 28 Minuti |
| Quantità di filamento | ~ 6 grams of pla |
| Dimensioni | 68mm X 63.5 X 12.7mm |
| Tecnologia | FDM |
| Complessità | Medium |
| Supporto Gratuito | YES |
More Information
Object Parts
