Collapsible dice tower
Collapsible dice tower
Published 2020-07-24T12:25:39+00:00
Hey everyone, I have designed a collapsible dice tower that pulls up and rotates to lock into place. Each piece can be printed separately and assembled. It was a fun piece to design and I hope you guys get some use out of it! There is a thin walled and a thick walled version available for download, personally I printed the thin walled but some of the walls are very close to 0.4mm so your printer and settings need to be perfect to print it. If not, I would recommend the thick walled version, either way it should function the same and collapse to nearly the same size.
Note: this is not the easiest print as the clearance between each piece is approximately 0.8mm so make sure your printer is well tuned before attempting this.
Second note: some people have reported issues with PruseSlicer when preparing the thin walled version for printing. It seems that Cura handles the inclusion of 0.4mm walls better than the PruseSlicer does. I have redesigned the pieces so that they have thicker walls and uploaded a version of the model with this fix.
Requires support for the base piece and fourth layer, the support for the base piece cannot come from the buildplate and must be printed on the bottom of the part.
Date published | 24/07/2020 |
Supporto Gratuito | YES |