Desk Lamp. Latice Design. Two Part
Desk Lamp. Latice Design. Two Part
3D
Published 2017-07-18T11:48:21+00:00
This lamp design comes in two parts for easy printing and requires no supports. I Have printed the base in two colours and they can easily be switched and swapped.
I am using a e14 screw fit ikea LED bulb in these pictures with a cheap light fitting from amazon (https://www.amazon.co.uk/gp/product/B0722JD1DC/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1)
The center pillar that holds the light fitting is 26mm wide so it will hold a standard E14 light fitting.
I used a retro filament style LED bulb (http://www.ikea.com/gb/en/products/lighting/light-bulbs-accessories/nittio-led-bulb-e14-20-lumen-globe-copper-colour-art-20317244/) I wouldn't recommend using a non-led bulb due to heat.
It is around 28cm total but as it comes in two parts i was able to print it comfortably on my Prusa Mk2.
Any questions just ask!
0.2mm layers with no supports.
I set the seam position to "rear" in slic3r as the circular nature of the base gives the slicer less places to hide the layer change internally. This means there should be a clean finish around the base
| Date published | 18/07/2017 |
| Tempo per farlo | 24 - Minuti |
| Quantità di filamento | 350g |
| Tecnologia | FDM |
| Complessità | Very Easy |
| Supporto Gratuito | YES |