Full rebuited GUNDAM - meshmixer supports
Full rebuited GUNDAM - meshmixer supports
3D
Published 2015-09-03T17:52:16+00:00
Hello, I'm a great fan of the classic robots but I wasn't able to find anywhere a good 3D model of the Gundam Robot to print: all you can find around the web are 3D surface models working very good for renderings and animations, but they are a complete disaster for the 3D printing, even if you apply NETFABB or some other repair software to make them solid.
So I decided to make a serious job and completely REBUILD ALL the Gundam in one unique veryfied solid, and after that I made the supports with MeshMixer. The result is (I think) the only one Gundam 3D printing oriented, and after a first printing here you find the file to share it with all of you.
All the best from Italy!
Printed at 0,25 mm layer height, with 50% infill. This took 77 hours and 26 minutes and used 402 g of filament .
| Date published | 03/09/2015 |
| Tempo per farlo | 4646 - 4656 Minuti |
| Quantità di filamento | 402 g |
| Dimensioni | 179 mm x 303 mm x 126 mm |
| Tecnologia | FDM |
| Complessità | Medium |
