Jeep with tank tracks
Jeep with tank tracks
3D
Published 2015-08-27T09:38:10+00:00
Hi there!
I’m sincerely hoping you will enjoy this 3D printed Jeep with tank tracks controlled by android phone! The construction is very simple, in one day you can fully print & build it!
To Control it you have to download in the Play Store the "Bluetooth RC Controller" app.
Found stuff you will need to make it below
Enjoy this project !
Cheers
You will need few electronics things to make it:
• 2 small Gearing Motor
• 1 Battery LIPO 2S
• 1 Arduino UNO
• 1 Motor Shield
• 1 Bleutooth Receiver
• 4 LEDS & resistors for head light!
• M3x30-35mm screw to fix the front wheel
I printed tank tracks in NinjaFlex, but you could print in in an other flexible filament !
I give you links to stuff I have use to build mine! It’s up to you to use different but equivalent stuff.
Motor :
http://www.robotshop.com/ca/fr/moteur-engrenages-pololu-50-a-1-micro-hp.html
(50 :1 Reduction work well, you can also try with 30 :1 )
Motor shield:
http://www.robotshop.com/eu/fr/blindage-controleur-moteur-arduino-v3.html
Shield Bluetooth:
http://www.robotshop.com/eu/fr/blindage-bluetooth-arduino-maitre-esclave.html
Battery:
http://www.a2pro-online.com/black-lithium-2200mah-35c-2s-119-grs.html
| Date published | 27/08/2015 |
| Dimensioni | 90*150*80 |
| Tecnologia | FDM |
| Complessità | Medium |