Lamp
Lamp
3D
Published 2018-02-15T10:37:52+00:00
Hey,
today I share my design for a lamp.
All you need is the printed item so many times, you like. And for the Light the same time of Light Cable, Cans and LEDs.
For example you can use this items:
And you need an option for hanging of your lamp. For example a piece of drift wood.
Cut of the cover of the Can and put the printed Piece in there. And if you like a special Look, you can take colour cans for this and let drop a little bit of colour at the sides. scale the piece bigger for this. Or if you use Cans like RedBul, so make a few holes in the sides of the Can, so you can get a special look.
Thanks for save the world :D
#FuelingInnovation @MyMiniFactory @Esso_GB @bcn3dtech
print 0.3 mm layer height with 15% fill.
| Date published | 15/02/2018 |
| Tempo per farlo | 15 - 30 Minuti |
| Quantità di filamento | 7g |
| Dimensioni | 43.54 mm x 49.43 mm x 5 mm |
| Tecnologia | FDM |
| Complessità | Easy |
| Supporto Gratuito | YES |
