LEDLAMP
LEDLAMP
Published 2017-06-19T12:25:51+00:00
I created this table lamp with a height of 40cm ,consisting of 8-13 pieces, so it can be printed on 3D printers.
Lamp can be fitted: 3-5 base legs ,1-3 rhum / hat / arrest
The body is drifting on the cable. One lamp hat fits 4x5mmLed.
When installing rooted LED diodes, an example for calculating the resistor
Example:
Battery voltage is 12 V and we have the following data from the catalog:
LED voltage = 2 V a
the maximum possible current flowing through the diode is 20 mA.
First Specify the resistors size.
UR = Uz-Ud
Secondly, by ohm the law, we calculate the resistance of the resistor.
For U, put the already calculated voltage on the resistor (10 V) and after we mount a current that can flow through the diode (20 mA = 0.02 A).Watch the current in mA! If we get 20, it's nonsense.
If you enjoy with my designs, I invite you to become a patron, you will get early access to my designs and exclusive content! Also, you can help with a small donation.
https://tomshik3d.wixsite.com/tomshik3d
Infill main base 50%, legs not required. Other parts infill 25%. Fast printing speed
Date published | 19/06/2017 |
Tempo per farlo | 24 - 50 Minuti |
Quantità di filamento | 160 grams |
Dimensioni | 90mm x 180mm x 270mm |
Tecnologia | FDM |
Complessità | Medium |