This is a (work in progress) 1:10 RC car body for HPI Maverick Strada MT (2017 edition, MV12623). Also compatible with: Redcat Volcano EPX Pro, HSP Brontosaurus, Exceed Infinitive, Himoto EMXT-1, Amewi Torche Pro (which are basically the same car).

It's split in two pieces in order to fit on most printers. Use ABS glue/slurry/acetone to join the two halves together and use M3 screws to tighten everything back up.

Slic3r gcode is included for convenience, no supports, 8mm brim, 0.2 layers. Estimated times are around 23-24 hours for each half.

Not printed yet ! if you try it out, a comment about how it turns out will be much appreciated.