Loading
Spider-Man bust
Published 2018-10-07T19:59:13+00:00
Spider-Man bust
Published 2018-10-07T19:59:13+00:00
✔ For more sculpts like this, take a look at my Patreon.
The Amazing-Spider Man. Tadaa!
Some more super hero fan art, yay :) I've had this guy sculpted for maybe a month now, but honestly I've been too busy using my spare time to play video games to publish anything new (I had to finish God of War, and, well... then there was the Marvel's Spider-Man game, and now Assassin's Creed Odyssey...)
Anyways. Enjoy! Any questions, drop a comment or hit me up in a PM (which I know I've been lousy answering lately).
About the design
It was digitally sculpted in ZBrush as usual, using no fancy brushes or anything, 95% Dam Standard and Clay Buildup, and a lot of smoothing.
As you can tell around the shoulders this Spidey is inspired by the design in the game Marvel's Spider-Man, but not an exact copy. I kept the eyes more low-tech- and the web pattern is a bit different. I did struggle a lot with the spider logo on his chest, and I'm still not happy with it 100%.
The base. It's more advanced than I usually make them, but I wanted to give detailing it a bit more a try this time around. I normally dislike bases that are too detailed and complicated because I think it detracts from the main subject. It was fun, though, and I hope you guys like it :)
About printing this guy
He should only need supports under his chin, but if your printer lacks a part cooling fan you might want to add some others. If someone really wants a version without the rebar in the concrete, let me know.
This is fan art, provided for free, and I fully acknowledge the Spider-Man likeness is the property of Marvel Entertainment, LLC (The Walt Disney Company).
I printed this on my CR-10S using some basic PLA (from 3DNet, no affiliation), and the following settings:
Layer height: 0.12mm
Nozzle: 0.3mm
Perimeter: 0.9mm
Speed: 50mm/s (but S3D slows it down to 50% on the outer perimeter)
Top/bottom # layers: 6
Infill: 5% rectilinear
Print time: 17h 00m 18s
Date published | 07/10/2018 |
Tempo per farlo | 17 - Minuti |
Quantità di filamento | 57g |
Dimensioni | 61mm x 102mm x 150mm |
Share 3D Post on Facebook
Just your friendly neighborhood Spider-Man!
Spiderman is ready for his new adventures! painted with acrylic paint by hand. Time to get a airbrush kit to get this to the next level. Next will be Superman!
Printed at 200micron, with supports on bed contact only.
Uniz slash Plus UDP 0.1mm layer height.
cracking model, Cr-10 0.2 layer height
0.14mm layers, scaled down. Painted with glossy black primer and dry brushing with copper acrylic paint. Perfect model!
Perfect design!
Printing time: 18h Layer height: 0,12mm
Thanks for the great model. My supports under chin got a bit wobbly, and a slight layer shift in the head (don't know what caused it). But nice model . Thanks
Used support fir the chin only it is 25 cm took 16 hours to print
Printed with Klipper running on the RPi3 Layer Height: 0.16 Infill: 5% Speed: 120mm/s Support: Yes, but only under the chin Print time: a bit more then 7 hours
Primed and painted. Used some cheap craft paints. Haven't painted a model in a long time so this was a lot of fun! Printed on heavily modified Tronxy X1 using a clone V6 nozzle.
Incredibly well designed model. Thanks!
Great model, thank you very much! i have printed one in 100% size, 3 Shells 0,12mm Layer high, 10% infill in black cheap PLA on my Anycubic I3 Mega - the result is very nice. I have printed without support, the chin was a litte bit unclean, but that is no problem, i have fixed it after print. Thanks! Greetings from the north of germany
Awesome model..
Printed at .12 on Amaz3D Red at 70%. Awesome shape!
Printed this to test some of the new Spectrum PLA sparkly filaments. Apart from huge overhang, this prints very nice and of course, awesome model as usual.
2 TECNICAS DE PINTURA
0.12 mm layer height @ 45mm/s using Amazon Basic PLA (Silver)
Printed at 0.1mm and hand painted by me
thanx
What a beautiful print. Thank you soooo much fun r the sculpture on to death pool of yours next I scaled mine down. printed at 10% infill 015layer height 50mms print took 7hrs20mins
Loved the model. Scaled 50%
Thanks for another great model!
This is such an awesome model! Thanks for sharing! I printed it at 0.2 layer and painted it with acrylic paints.
Spider-Man Bust by eastman in SpiderMaker Matte Coral Red PLA. Direct from printer. No Post processing. Printed at .15mm layer height on Prusa MK3S with single support structure under chin. Brilliant model and the absolute best PLA available.
Thanks for your great work!
Thanks for sharing this model!!
I love this print. Started my journey of painting on this about a month ago and painted too thick so stripped it back down and re did the bust. Still go a way to go with my painting but live printing these
0.06 mm. 15% infill. Support. No sand, only painted.
Awesome model. I flipped the normals on it in maya and ran it through netfabb for a little insurance. Came out amazing. Used cura tree supports and .2mm layer height. And printed it a little bigger. Awesome model!
I printed with stronghero3d latest MetalX rainbow pla filaments and one is from epick rainbow, look great
Thanks for you great work, I love this model, look forward your more works to come.
Thanks to You! This model is awesome.
Thank you for these great models! Printed at 0.12mm, painted with spray paint (white primer, then metallic bronze). This is my first real try in painting a print, and I think it came out pretty good! :)
Printed hollow on the Anycubic Photon.
Awsome model
Thank you for sharing a very good design! I needed only a little support on the jaws, and no support was needed. However, for the sloping side, it may be necessary to set the output order to in-> out. I printed it out-> in and the sloping side was a bit rough. Everything is pleasant printing, always healthy and happy!
Ender 3 printing great print the inside shoulder a little rough printed with standard supports in cura
Thank you for such nicely designed model.
Awsome bust! Your designs are amazing!
Very cool stuff. Here's what I got.
great model! A pleasure watching it!
Great design! Is wonderful!
gran diseño ..uno lo hice en grande y otro en pequeño
Custom printer Pla 0.2mm l.h. Model scaled to 100mm Brush hand painted
Great design
Thx
just silver pla, no Printjob :)
Estupendo diseño y pedazo artista. Recomendado imprimir para cualquier usuario. Gracias @eastman.
Turned out fantastic.. also cause I'm a child at heart lol... it's totally cannon now.
Thanks for the Awesome Model
love it
Thanks for the amazing model. You design the best stuff!
Great model.. love painting it..
I like your art very much.... Thanks
Great models and they print really well!I've been printing for a month now and this is my first attempt to paint anything. Thanks! Printed on Ender 3 (tree support only under chin), Cura 4.2.1, .2mm layer height, Overture PLA
fue un placer pintarlo, me encanto
Printed with 0.1mm resolution. Did some sanding and light sand blasting for prep. Painted with water based acrylic paints and coated with satin clear. Turned out so well, I made extra one for a friend.
Such a rad mini. Decided to paint using the PS4 Spider-Man theme primarily with Citadel Contrast paints.
Finger painted a few of these
Great Model!!
Printed in Solutech3d Grey; painted with spray, acrylic and oils;
A little mess up under the chin, but only because I forgot to add supports.
Thanks!
My favorite model of yours yet! Than you so much and keep up the good work! (Still working on painting)
Impreso a 0.12, capa de resina y pintado con acrilicos.
Muy buen trabajo del diseñador. GRACIAS
my offering paint not upto most peoples quality thank you for the superb model David.
120% scale printed PLA Plasty mladeč 0,12mm layer
Elegoo Mars. Awesome model-thanks!!!
Elegoo Mars. 65mm, 003mm Layer. Black Primer, Bronze Acryl, multiple times Red Glaze, Bronze again for spider and eyes. Thanks for the fantastic busts!
Thanks for this very nice model. Printed with Elegoo Mars, acrylic painting
red filament is really spider man
Love it so much ... many thx for the awesome sculpt .... now ready for painting
This is a great sculpt! Very funny to print and finish! I’m very happy with the result. Thank you for sharing!
Great sculpt
Great design and easy to print, Check my make here https://www.instagram.com/p/B_rRurMjxV-/?igshid=e7tyn1dfuftc
This bust turned out freaking awesome! Yes, I should have done red but I didn't have any! Love this bust so much. Only supports I used were under the chin, not sure if actually needed though.
This reminds me of Spider-man 2 on PS2, Great Easy Print, Thanks David!! I even created a time-lapse which has a cool swinging effect at the end. http://youtu.be/z4NsEv3mU3Y
Excellent Detail. The rebar is a bit fragile at the scale i printed it but other than that its awesome! :)
Моя первая печать. Модель потрясающая, спасибо автору! Привет из Беларуси.
Spiderman bust printed LIFE SIZE. 635mm tall. I used my Creality Ender 3 to print 10 pieces. Glued, Wet sanded, airbrushed and hand painted touch ups. the black is black 3.0 for extra contrast to the other colors. contact me if your interested in life size prints.
Amazing Details in the model.
Printed in metallic red petg
Printed and (painted thanks to John Talbot). This is gonna make a great cake topper for our Grandson.
my spidey bust ;)
great model! painting was a lot of fun for me
First time I paint a model
Printed and painted.
Really fun print and fun to paint! Hand painted with Galeria Acrylic paints.
Time-lapse print video : https://youtu.be/Ljx36CBOkzY Really great model. Remix to support free and printed. Subscribe to find out more support free 4K Time-lapse video: https://www.youtube.com/iczfirz
Awesome model, forgot to put support on chin but turned out good, 0.12 layer height, 10% infill, scaled down a bit and took about 15h to make.
Bust of 20 cm hight, printed on the Anycubic Mono X and painted with mostly Vallejo model colours.
Looks good
Looks good
Printed in 100mm with elgoo mars
Elegoo Mars 2 Pro - Quanton3d Resin
I don't know what happened. I tried, but something went wrong. Any advice would be helpful. Tnx in advance.
Printed for test UV-resin.
Another Masterpiece from eastman. Thx for this Sculpt
Apenas um suporte customizado no queixo.
Great work, as always, Eastman. I did add a comic book themed logo to the base.
Si vous voulez découvrir mes impressions, vous pouvez aller voir mon Insta : guigeek_
Impresora Hellbot Magna 2 300 en 0.20 con relleno del 20% y soporte
This is a great file. Thanks for uploading it!
Thanks for the upload, heres my take on this print.
Tnx Eastman for this wonderful bust. I really enjoyed painting it and I'm super happy with the result. My phone camera doesn't give justice to the paintjob. There is much more difference in color gradient between parts in shadows and parts exposed to light. Printed with elegoo water washable Grey resin. Painted with brushes and army Painter color range. Finished with Vallejo Matt warnish.
Tnx for the model, super fun painting it and very happy with the result. My phone camera isn't good at contrast, I tell you that the shadows are much more darker in reality. Printed with elegoo water washable Grey resin. Painted with brushes and army Painter color range. Final coat with Vallejo Matt varnish. This is my 3rd bust from your models. Next stop: DREDD
Painted with a bronzed statue look
This one gave me the most praise on the painting so far. Very fun to paint too
Cheers for the model.. Anycubic Photon Mono 4k.. Took about 7 hours to print..Still got the base to do and some neatening up, but so far happy days.
My Spider-Man bust print. And a list of color possibilities I mocked up before I painted it. Could be an inspiration for someone who wants to go with an alternative scheme.
So nice thanks. I have print with sup
Very nice.thank :)
I am not good at painting but i used the idea of another user on the base
Thanks for the template. I had fun painting too.
Anycubic Photon Mono X 6K, got an annoying spot on the forehead but couldn't be arsed to fix it. An early print test, final painted out of boredom ;)
printed on my old Elegoo Mars acrylic paint + somme chrome paint
Printed with 3D Fuel Worday Industrial Gray, 0.2 layer height.