Star Rear bike lights
Star Rear bike lights
Published 2015-09-24T14:42:19+00:00
This is a small case for the rear bike kit, while the light flows through two stars. Print the pieces and amssemble reading the following steps:
1)Solder the two battery holder cables to the PCB
2)Rest the PCB on the box and attach it with 4 M3x15mm screws and their nuts
3)Glue the two star-shaped solids on the lid
4)Rest the lid on the box, sealing it with silicone and fix the assembly with two self-threading countersunk screws with diameter 2.9x20mm
5)Take the short bracket, hook it to the box bracket and fix it to the seatpost with an M5x40mm screw and its nut
Note: to preserve the battery life, use a slide switch connected to the positive battery cable.
Print at 0.2mm layer height and 10% infill.
Date published | 24/09/2015 |
Tempo per farlo | 420 - 430 Minuti |
Quantità di filamento | 62 g |
Dimensioni | Multiple parts |
Tecnologia | FDM |
Complessità | Medium |