3D printed Lock
4,489
views
242
downloads
2
collections
0 comments
Loading comments... 
3D printed Lock
3D
Published 2019-04-16T16:00:11+00:00
40
0
Add to Collection
Description
This is a 3d printed lock. Inside there are 4 pins, which can be 3d printed. For this design you also will need some springs. 4 above the pins. These need a diameter of 5 mm and a lenght between 15 and 20 mm. If you want to springload the drawer you need two springs with diameter 6 to 8 mm and a lenght between 10 and 25 mm. You also will need four m3 screws and nuts. In the drawer there are two holes for two 4 mm pins of length 10 mm, if you want the drawer to stop jumping out.
Printing Details
This was printed in PLA
Technical Information
| Date published | 16/04/2019 |
| Support Free | YES |
More Information
Object Parts