6 x 2.5" Drive to one 5.25 Optical Drive Bay Adapter.
6 x 2.5" Drive to one 5.25 Optical Drive Bay Adapter.
3D
Published 2015-06-07T02:00:23+00:00
A simple, cost-effective solution for high-storage density of 2.5" drives for home and small office use.
Compatible with 9mm and 7mm height drives.
Not recommended for high performance drives due to limited thermal dissipation.
Assembly consists of three seperate pieces that are fascined by four standard computer fan screws or any 7/32" or 5.5mm self-tapping screws.
Due to the "bulge" on the top piece necessary to safely secure it to the bottom piece, it is not recommended to insert this adapter with other accessories directly above it and may require a little force to insert into a chassis.
Additionally, due to the compact and rigid nature of the design, only Solid State Drives and low-rpm Hard Drives are recommended for use with this adapter as storing mutliple high performance Hard Drives together may compound micro-vibrations that will reduce their life.
Print at 0.2 mm layer height, with 10% infill. This uses 133 g of filament and takes 29 hours and 10 minutes.
| Date published | 07/06/2015 |
| Time to do | 1750 - 1760 minutes |
| Material Quantity | 133 g |
| Dimensions | multiple parts |
| Complexity | Medium |