72 Chevy Prerunner Project Full Cage Pieces
72 Chevy Prerunner Project Full Cage Pieces
Published 2018-07-19T15:43:05+00:00
These are the cage pieces I used for the 1972 Chevrolet K10 Prerunner build. The cage fits a Feiyue FY01 Fighter-1 1/12 Short Course Truck and a Pro-Line 72 Chevy C10 body. This cage may fit other applications as well.
The YouTube playlist for this project can be seen here: https://www.youtube.com/playlist?list=PL_C9a338X9XNPDtQkikr2Rt29hYTUveQI
I recommend checking out these build videos if you have not already to see how I fitted the cage to the chassis and body as well as seeing what modifications I made to the chassis. I also show all the post print finishing processes I used to get the cage to look smooth.
Infill:
Solid recommended since sanding and trimming will likely be necessary for proper fitment.
Notes:
A relatively large build platform will be necessary to print these pieces. Support material is needed and a raft should make getting good bed adhesion much easier.
Date published | 19/07/2018 |
Technology | FDM |
Complexity | Easy |