Action camera diver's handle #4 - AussieLand edition
Support Free
Featured
4,288
views
129
downloads
1
collection
0 comments
Loading comments...
Action camera diver's handle #4 - AussieLand edition
3D
Published 2018-08-16T08:39:59+00:00
23
0
Add to Collection
Description
This is the latest iteration of my favorite underwater camera handle.
I made the two big slots on the sole to make handle mounting even easier. To match the rod endpoint diameters with the Dinkum FlexiJoint pieces (30 mm) I have shortened the global length to 238 mm so now it fits a 200x200 mm build plate if you turn the model 45° in Z.
To assemble the handle you will need:
## In the sole
- 2 pcs 1/4-20 UNC threaded insert (I have used one of these - the holes are 8 mm in diameter so basically all threaded insert would work, just heat them up with a soldering iron and push them in)
- 2 pcs rods with 1/4 UNC screws on both sides (I strongly suggest Dinkum FlexiJoint - just buy a pair from the cheapest one)
- 1 pc UNC 1/4" camera screw
## In the rods
- 2 pcs 1/4" UNC nuts
- 2 pcs 1/4" UNC bolts (>=18 mm in length)
Technical Information
Date published | 16/08/2018 |
Technology | FDM |
Complexity | Easy |
Support Free | YES |
More Information
Object Parts