AEMISC06 - CR2032 Battery Case
AEMISC06 - CR2032 Battery Case
Published 2024-01-19T06:45:56+00:00
Colin Christenson worked up another fantastic utility model for us, the CR2032 Battery Case.
Stack and track your precious battery coins. This model prints in two easy parts. Snap them together and you will find your 8 battery chest is fully assembled.
If you have any additional issues, we remain at the ready to serve. Have an Idea? Please share it with us on Discord! Our best ideas come from the minds of our fans!
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
Date published | 19/01/2024 |
Support Free | YES |
Just a quick print of the new Battery Chest designed by Colin Christenson this handy little chest will hold 8 CR2032 batteries.