Automatic Print Ejector - The Punching Machine
Automatic Print Ejector - The Punching Machine
Published 2018-02-28T17:57:57+00:00
For best results, print with MatterHackers PRO Series ABS
Developed by the MatterHackers Engineering Team - the Punching Machine gives your printer the ability to remove the printed part from the bed without any human interaction. See it in action below.
Recommended Print settings:
Layer Height: 0.2 mm Layers
Perimeters: 2 Perimeters
30% Infill
Note: the boxing glove and wades_small_gear are licensed Creative Commonsare and reused and/or modified
Please share your adaptations to your printer! Send email including pictures, or better yet a video, to: support@matterhackers.com. We will update the webpage with your Print Ejector!
COMPONENT LIST (What you will need)
Printed Parts (download them on this page)
1×NEMA 17 Stepper Motor
1×Polulu Stepper Motor Driver
1×OpenBeam 24 cm Extrusion
34×623ZZ Ball Bearings3mm ID, 9.5mm OD
14×M3 x 12 Bolts
2×M3 x 20 Bolts
18×M3 x 8 Bolts
30×M3 Nuts
20×M3 Washers
Date published | 28/02/2018 |