Christmas T-vent decorations
$0.99 Christmas T-vent decorations
3D
Published 2018-11-27T16:58:01+00:00
Hi, if you like this check out my other creations and support me here
If you already have any of my candelabras and want to dress them up for the festive season then here are the prints for you, they fit into the candelabras in place of the tealights.
One is a little Christmas Tree while the other is a Candle Flame for you to mix and match as you like.
I would recomend you print both or two at the same time as traveling between them will help the tops cool and help stop a blob forming on top.
Material PLA
Layer height 0.1mm
Nozle width 0.4mm
Walls 0.8mm
Top/bottom thickness 1mm
Infill 12% minimum, cubic
Print speed 60mm/s
Wall speed 30mm/s
Travel 60mm/s
NO Support needed
The print time and dimensions below are for each file
| Date published | 27/11/2018 |
| Price | $0.99 |
| Time to do | 137 - minutes |
| Material Quantity | 13grams |
| Dimensions | 38.5 x 38 x 75.5mm |
| Support Free | YES |