CONCEPT (Polypanel competition)
CONCEPT (Polypanel competition)
Published 2019-04-30T18:28:44+00:00
⚠ You can download the final version here: https://www.myminifactory.com/object/3d-print-93016
This is my first concept entry to the Polypanels competition: https://www.myminifactory.com/competition/polypanels-competition-173
I decided to use the Polypanel system to build a phone holder/standard.
First option is connecting the two clamps to the left and right side of the device panel
together with the two hinges to hang it on your car mirror to navigate for example.
The other option is to connect the small clamps on the left and right side and connect the support panel in the middle.
Then you can put a phone inside to watch something while your phone is on a table/desk or something like that.
This 'Device Specialty Panel' is designed for the Samsung Galaxy S7 Edge. You can alter it to any other size with FreeCAD:
alter the rectangle size and change the position of the connectors (snaps) with it.
The Polypanel connectors (snaps) are seperate parts.
Or maybe you can find another way to alter it. Product usage is for your own risk.
This complete concept consists of the following parts:
- 1 device
- 1 hinge left
- 1 hinge right
- 2 clamps
- 1 small clamp left
- 1 small clamp right
- 1 support (square with the triangle on it)
⚠ Usage of any models from 3DParts4U will be at your own risk!
⚙ My PETG Simplify3D print settings:
- 3600mm/minute (60mm/second)
- hotend 215°C | bed 70°C
- 250 micron | infill 20%
- 3 top layers | 3 bottom layers | 3 outline layers
- brass nozzle 0.35mm
- extrusion width 0.44mm
- retraction 0.75mm
- extrusion multiplier 1.00
- coasting 0.20mm
- wipe distance off
- fan 100%
- no support needed
Date published | 30/04/2019 |
Support Free | YES |